Laying paving stones is a DIY project that takes about a weekend to complete. Add and level the cobblestone sand. Add stones for borders or cobblestone borders. Place the pavers on the base of coarse-grained sand.
Walk gently on newly placed cobblestones to reach the next rows. Keep the pavers tight to each other, as wide joints cause weeds between the pavers. While laying patio pavers is a fairly simple and straightforward exterior project, handling base materials and pavers is an exhausting job. To further ensure that pavers don't move over time, apply a thin layer of cobblestone sand to the surface.
For the avid DIY enthusiast, paving stones are actually one of the easiest ways to create a beautiful walkway, driveway, or patio, but laying paving stones on your own still requires a lot of work and meticulous planning. Although pavers can technically be placed directly on the ground, they are much less likely to resist the elements and move more quickly compared to pavers installed on gravel and sand. And finally, the paved patio base panels have built-in channels and holes to drain water to the lower sand layer. Before you start laying concrete pavers, you'll want to make sure that you can actually place pavers on your property.
Be sure to keep the height uniform throughout the area, as this is the last layer; its height will determine the final height of the patio. If you enjoy a few days of hard work, laying paving stones is a simple project that doesn't require a professional. If you have a large project or if you want to use large format pavers (24 inches by 24 inches or more), you may want to have a contractor or garden company do the work for you. If you are going to place pavers in curves or diagonally, increase the excess to 15 or 20 percent.
